Email this article Key Technology of Predicting Dynamic Surface Subsidence Based on Knothe Time Function
Abstract
A method for calculating the parameter of Knothe time function was presented. The principle of predicting dynamic mining subsidence was discussed based to the relationship between the periodic fractures of main roof and surface subsidence. Pointed out there might be a section whose width was shorter than a mining unit when divided a workface into equal mining elements, the section should be calculated specially in the algorithm. A model of predicting dynamic mining subsidence was made according to the Knothe time function and probability integral method. A model how to divide a workface and two coordinate transformation models among three coordinates also were made. An algorithm step of the dynamic prediction model for multi-face mining was designed and implemented. And the algorithm was tested by nine measured subsidence data in different times of some mine 1176 east face, the result showed that the prediction results agreed well with the observation data, and the feasibility and effectiveness of the algorithm were demonstrated. Finally, the process of surface subsidence and deformation of 1176 east face was back analyzed.
Keywords
References
Peng S S. Surface subsidence engineering. New York: SME, 1992. He Guo-qing, Yang L, Ling Geng-di. et al. Mining Subsidence[M]. Xuzhou: The Publishing House of China University of Mining and Technology, 1991.(in Chinese)
Peng Xiao-zhan, Cui Xi-min, Zang Yong-qiang, et al. Time Function and Prediction of Progressive Surface Movements and deformations[J]. Journal of University of Science and Technology Beijing, 2004, 26(4): 341-344. (in Chinese)
Wu Kan, Ge Jia-xin, Wang Ling-ding, et al. The integrative means of Subsidence prediction [M]. Xuzhou: The Publishing House of China University of Mining and Technology, 1998.(in Chinese)
Ma Feng-hai, Fan Xue-li, Wang Yong-jia. Discrete element method for rock movement analysis[J]. Journal of China Coal Society, 1996, 21(4): 388-392.
Qing feng Hu, Xi min Cui, Chun yi Li, et al. Algorithm of Predicting Dynamic Surface Subsidence and Deformation for Multi-workface Mining[A]. Wenbin Hu, Xin Li. 2009 International Conference on Information Engineering and computer Science[c]. New York: The Institute of Electrical and Electronic Engineers, 2009.3079-3083.
Knothe S. Time influence on a formation of a subsidence surface[J], Archiwum Gómictwa i Hutnictwa, Kraków(in Polish), 1952, 1(1): 1.
Cui Xi-min, Miao Xie-xing, Zhao Ying-li, et al. Discussion on the time function of time dependent surface movement[J]. Journal of China Coal Society, 1999. 24(5): 453-456.
Wang Jin-zhuang, Xing An-shi, Wu Li-xin. Mining subsidence and its damage and control. Beijing: Mining Press. 1995. (in Chinese)
Kowalaki A. Surface subsidence and rate of its increments based on measurements and theory. Archives of Mining Science, 2001, 46(4): 391~406.
Cui Xi-min, Chen Li-wu. Dynamic supervision of large deformation of subsidence and its stress analysis[M]. Beijing: Mining Press. 2004. (in Chinese)
Ximin Cui, JingJing Pei, Debao Yuan, et al. Automatic Prediction of Progressive Surface Subsidence Basin for Multi-workface Mining[A]. Guobin Li, Zongpu Jia, Ziyi Fu. 2008 Proceedings of Information Technology and Environmental System Sciences[Volume 2]. Beijing: Publishing House of Electronics Industry, 2008.70-75.
Qian Min-gao, Shi Ping-wu. Ming pressure and strata control [M]. Xuzhou: The Publishing House of China University of Mining and Technology, 1991. (in Chinese)
Full Text: PDF