A Web-based Computer-Aided Material-Selection System for Aircraft Design

Abstract

[1] A. Jahan, M. Y. Ismailand, S.M. Sapuan and F. Mustapha, “Material screening and choosing methods – A review,” Materials and Design, vol. 31, 2010, pp. 696-705.
doi:10.1016/j.matdes.2009.08.013

[2] Y. B. Chen and L. J. Yue, “Present status of optimizing selection of mechanical engineering materials,” Chinese Journal of Mechanical Engineering, vol.43(1), 2007, pp. 19-24. (in Chinese)
doi:10.3901/JME.2007.01.019

[3] M. F. Ashby, Y. J. M. Bréchet, D. Cebon and L. Salvo, “Selection strategies for materials and processes,” Materials and Design, vol. 25, 2004, pp. 51-67.
doi:10.1016/S0261-3069(03)00159-6

[4] S. M. Chen, “A new method for tool steel material selection under fuzzy environment,” Fuzzy Sets and Systems, vol. 92, 1997, pp. 265-274.
doi:10.1016/S0165-0114(96)00189-3

[5] H. Mahmudi, B. Dehghan Manshadi and R.Mahmudi, “Materials selection for the wing structure of a Human-Powered Aircraft (HPA),” Proceeding of first international and third biennial conference of aerospace engineering, Tehran, Iran; 2000, pp. 1405-1413.

[6] B. Dehghan-Manshadi, H. Mahmudi, A. Abedian and R. Mahmudi, “A novel method for material selection in mechanical design: Combination of non-linear normalization and a modified digital logic method,” Materials and Design, vol. 28, 2007, pp. 8-15.
doi:10.1016/j.matdes.2005.06.023

[7] R. S. Khabbaz, B. D. Manshadi, A. Abedian and R. Mahmudi, “A simplified fuzzy logic approach for material selection in mechanical engineering design,” Materials and Design, vol. 30, 2009, pp. 687-697.
doi:10.1016/j.matdes.2008.05.026

[8] A. S. Milani and A. Shanian, “Gear material selection with uncertain and incomplete data: Material performance indices and decision aid model,” Int. J. Mech. Meter. Des., vol.3, 2006, pp. 209-222.
doi:10.1007/s10999-007-9024-4

[9] A. Shanian and O. Savadogo, “A material selection model based on the concept of multiple attribute decision making,” Materials and Design, vol. 27, 2006, pp. 329-237.
doi:10.1016/j.matdes.2004.10.027

[10] A. Shanian and O. Savadogo, “A Methodological Concept for Material Selection of Highly Sensitive Components Based on Multiple Criteria Decision Analysis,” Expert Systems with Applications, vol. 36, 2009, pp. 1362-1370.
doi:10.1016/j.eswa.2007.11.052

[11] P. Chatterjee, V. M. Athawale and S. Chakraborty, “Selection of materials using compromise ranking and outranking methods,” Materials and Design, vol. 30, 2009, pp. 4043-4053.
doi:10.1016/j.matdes.2009.05.016

[12] D. H. Jee and K. J. Kang, “A method for optimal material selection aided with decision making theory,” Materials and Design, vol. 21, 2000, pp. 199-206.
doi:10.1016/S0261-3069(99)00066-7

[13] A. S. Milani, A. Shanian, R. Madoliat and J. A. Nemes, “The effect of normalization norms in multiple attribute decision making models: a case study in gear material selection,” Struct. Multidisc. Optim., vol. 29, 2005, pp. 312-318.
doi:10.1007/s00158-004-0473-1

[14] H. H. Huang,G. F. Liu, Z. F. Liu and J. Q. Pan, “Multi-objective decision-making of materials selection in green design,” Chinese Journal of Mechanical Engineering, vol. 42(8), 2008, pp. 131-136. (in Chinese)

[15] R. V. Rao and J. P. Davim, “A decision-making framework model for material selection using a combined multiple attribute decision-making method,” Int J Adv Manuf Technol, vol. 35, 2008, pp. 751-760.
doi:10.1007/s00170-006-0752-7

[16] A. Thakker, J. Jarvis, M. Buggy and A. Sahed, “A novel approach to materials selection strategy case study: Wave energy extraction impulse turbine blade,” Materials and Design, vol. 29, 2008, pp. 1973-1980.
doi:10.1016/j.matdes.2008.04.022

[17] R. V. Rao, “A decision making methodology for material selection using an compromise ranking method,” Materials and Design,vol. 29, 2008, pp. 1949-1954.
doi:10.1016/j.matdes.2008.04.019

[18] X. J. Zhang, “Improved genetic algorithm based on family tree used for the material selection optimization of component made of multiphase materials,” Chinese Journal of Mechanical Engineering, vol. 44(3), 2008, pp. 220-227. (in Chinese)
doi:10.3901/JME.2008.03.220

[19] K. R. Trethewey, R. J. K. Wood, Y. Puget and P.R. Roberge, “Development of a knowledge-based system for material management,” Materials and Design, vol. 19, 1998, pp. 39-56.
doi:10.1016/S0261-3069(98)00010-7

[20] R. Amen and P. Vomacha, “Case-based reasoning as a tool for material selection,” Materials and Design, vol.22, 2001, pp. 353-358.
doi:10.1016/S0261-3069(00)00105-9

[21] S. M. Sapuan and H. S. Abdalla, “A prototype knowledge-based system for the material selection of polymeric-based composites for automotive components,” Composites Part A, vol. 29A, 1998, pp. 731-742.
doi:10.1016/S1359-835X(98)00049-9

[22] S. M. Sapuan, M.S.D. Jacob, F. Mustapha and N. Ismail, “A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components,” Materials and Design, vol. 23, 2002, pp. 701-708.
doi:10.1016/S0261-3069(02)00074-2

[23] R. F. Grove, “Internet-based expert systems,” Expert Systems, vol. 17(3), 2000, pp. 129-136.
doi:10.1111/1468-0394.00135

[24] Y. Duan, J. S. Edwards and M. X. Xu, “Web-based expert systems: benefits and challenges,” Information & Management, vol. 42, 2005, pp.799-811.
doi:10.1016/j.im.2004.08.005

[25] K. M. Saridakis and A. J. Dentsoras, “Soft computing in engineering design – A review,” Advanced Engineering Informatics, vol. 22, 2008, pp. 202-221, doi:10.1016/j.aei.2007.10.001.
doi:10.1016/j.aei.2007.10.001

[26] X. F. Zha, “A web-based advisory system for process and material selection in concurrent product design for a manufacturing environment,” Int J Adv Manuf Technol, vol. 25, 2005, pp. 233-243.
doi:10.1007/s00170-003-1838-0

[27] Committee on Application of Expert Systems to Materials Selection during Structural Design. Computer-aided materials selection during structural design. Washington: National Academy Press, 1995.

[28] K. L. Edward, “Selecting materials for optimum use in engineering components,” Materials and Design, vol. 26, 2005, pp. 469-473.
doi:10.1016/j.matdes.2004.07.004

[29] Y. M. Deng and K. L. Edward, “The role of materials identification and selection in engineering design,” Materials and Design, vol. 28, 2007, pp. 131-139.
doi:10.1016/j.matdes.2005.05.003

[30] I. E. H. Van Kesteren, “Product designers’ information needs in materials selection,” Materials and Design, vol. 29, 2008, pp. 133-145.
doi:10.1016/j.matdes.2006.11.008

[31] P. S. Ramalhete, A. M. R. Senos and C. Aguiar, “Digital tools for material selection in product design,” Materials and Design, vol. 31, 2010, pp. 2275-2287.
doi:10.1016/j.matdes.2009.12.013

[32] K. Cicek and M. Celik, “Multiple-attribute decision-making solution to material selection problem based on modified fuzzy axiomatic design-model selection interface algorithm,” Materials and Design, vol. 31, 2010, pp. 2129-2133.
doi:10.1016/j.matdes.2009.11.016

[33] K. Cicek, M. Celik and Y. I. Topcu, “An integrated decision aid extension to material selection problem,” Materials and Design, vol. 31, 2010, pp. 4398-4402.
doi:10.1016/j.matdes.2010.04.044

[34] C. G. Joseph and D. R. Gary. Expert systems: principles and programming (Fourth edition). Beijing: China Machine Press, 2005.

[35] E. Triantaphyllou and K. Baig, “The impact aggregating benefit and cost criteria in four MCDA methods,” IEEE Transactions on Engineering management, vol. 52(2), 2005, pp. 213-226.
doi:10.1109/TEM.2005.845221

[36] S. Opricovic and G. H. Tzeng, “Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS,” European Journal of Operational Research, vol. 156, 2004, pp. 445-455.
doi:10.1016/S0377-2217(03)00020-1

[37] C. Y. Yue. The theory and method of decision making. Beijing: Science Press, 2003. (in Chinese)

[38] M. F. Ashby. Materials selection in mechanical design, 2nd ed. Oxford (UK): Butterworth-Heinemanm, 1999.